Wednesday, January 18, 2012

DB3O: Versa-Tool DB3O Electroplated Diamond Semi-Round Cutting and Grinding Blade For Dremel Multi-Max, 3 Pack

!±8±DB3O: Versa-Tool DB3O Electroplated Diamond Semi-Round Cutting and Grinding Blade For Dremel Multi-Max, 3 Pack

Brand : Versa Tool
Rate :
Price :
Post Date : Jan 19, 2012 01:51:08
Usually ships in 1-2 business days



Versa-Tool Semi-Round diamond grout removal blades will effectively remove grout joints during tile repair tasks. The diamond coated surface of the SB3O outlasts carbide grit versions 10 to 1 and can be used for grinding and limited cutting of material such as glass, tile, ceramic as well as brick and masonry materials. The semi circular design allows the blade to access right into corner without damaging over cuts. Please note: Diamond blades for oscillating tools should not be mistaken to perform equally to a rotary tool. Use this diamond blade for limited cutting and notching of tile.

Nordic Track Elliptical Cross Trainer Quick Bargain Sale Cappuccino Machines

Monday, January 2, 2012

Using Ladders - Do These Safety Checks

!±8± Using Ladders - Do These Safety Checks

Accidents involving ladders can cause serious, even fatal, injuries. These often happen because the worker has not thought enough about how to use a ladder correctly.

Before you tackle any task which involves using a ladder, check out these ten safety tips.

Is the Ladder Safe?

1) Get the correct ladder. You might have to overstretch if the ladder is too short. You might have to put it at a dangerous angle if it is too long. Avoid using a stepladder to get into your attic. Have a proper ladder fitted to your attic, or use a leaning ladder.

2) Check your ladder carefully. Has it been stored outside? Wooden ladders expand when wet and contract when dry. In time, the rungs can loosen, causing the ladder to become unstable. Are any of the wooden rungs cracked, or do they show signs of rotting? Often, there is a metal support rod beneath each wooden rung. Is this in place and securely fixed? Have the screws or rivets that were used to attach metal rungs to the uprights broken or rusted away? Larger extension ladders may have pulleys and ropes. Do the pulleys operate smoothly? Does the rope show signs of wear, and is it still long enough? Make all repairs or replacements promptly.

Rungs often have anti slip grooves shaped into them. Be sure to remove any dirt that may have accumulated in the grooves. All ladders should have anti slip pads on the feet. Check that they are there and are not excessively worn.

3) Transport ladders safely. On a vehicle, secure the ladder to a proper ladder rack, or fasten it to a trailer on at least two points. A long ladder might hang out over the back of the vehicle, so tie a warning flag on the end to make it easily visible to someone following.

It is safest if two people carry a long ladder. But if you have to carry one unassisted and you choose to carry it horizontally, hold it firmly on your shoulder with one arm, using the other to maintain its balance. To avoid hitting anyone, keep the front end above head height. Remember, though, that you have the same length of ladder behind you as you have in front! Comedies make it seem amusing when people are hit by a ladder. In the real world, though, this is never funny-especially if you are the one hurt.

When you carry the ladder vertically, take the weight against your upper body, using one hand to carry it and the other hand, held above shoulder height, to balance it. Watch out for overhead wires, light fixtures, and signs!

4) Position the ladder correctly. For safety, the ladder should not lean sideways and must rest at an angle of 75 degrees from the floor.

5) Provide support at the top and at the base. Be careful where you put the top of the ladder. Make sure that the top surface against which the ladder rests is stable and nonslip. Never rest the ladder on glass or plastic. When possible, tie it securely to a fixture, with the top of the ladder rising about three feet [1 m] beyond the top point of landing.

Take particular care that when you initially climb the ladder, you tie it at the top. That first climb will not be secure, and neither will the last, when you climb down after untying it from the top. To make the first and last climbs safer, have an assistant hold the ladder at its base while you climb. However, this is only effective when the ladder is not longer than about 15 feet [5 m].

If the ground slopes away from the building, place something heavy at the base of the ladder or tie a lower rung to a fixture. If the ground is uneven but solid, use a wedge to get a level base. Provide a wooden board or something similar to make a firm base if the ground is soft or of loose material.

If you use a stepladder, make sure that all four feet are firmly on the ground, with the two sections fully apart and any safety catches locked in place.

Are You Safe?

6) Check your shoes. Before you climb a ladder, make sure that the soles of your shoes are dry. Remove anything, like mud, that might make you slip.

7) Carry things carefully. To leave both hands free for climbing, if possible, carry tools in a holder that is attached to a belt. Try to find alternative methods of lifting awkward objects, but if you must use a ladder, keep your free hand in contact with the ladder at all times by sliding it along the side of the ladder as you climb. Be deliberate and methodical, and do not rush.

If you use electric power tools, never use both hands to operate them. A drill, for example, may unexpectedly jam or slip, causing you to lose your balance and fall. Never lock them into an on mode; they may fall while still operating.

8) Be considerate of others. If you are working in a public place, make the ladder easily visible and, if possible, cordon it off. If you have to move the ladder around a corner, be aware that others will not be expecting this. Shout a friendly warning, and check to see if the way is clear.

When you have tools with you on a ladder, remember that even a small screwdriver can cause injury when dropped from a height. If you have to go away for some reason and you have been unable to tie the ladder securely, get someone to stand guard, or lay the ladder down safely until you return. Do not leave it unattended.

9) Check your state of health. Since climbing is largely a matter of balance and rhythm, do not climb if you feel sick or nauseated or if you suffer from vertigo.

10) Climb safely. At all times, be safety conscious. Never allow two or more people on a ladder at the same time. Never climb in strong, blustery winds. Never stand on the top rung of a stepladder or above the fourth rung from the top of a long ladder. Never overextend an extension ladder; always have at least three rungs overlapping. Never reach too far. If you lean too far while on a ladder, it is easy to lose your balance and fall. Rather than risk injury, move the ladder, even if it means taking longer to do the job. When climbing, look straight ahead.

Whatever precautions you take, there will always be dangers when you use a ladder. Hopefully you can minimize them with the help of these suggestions.


Using Ladders - Do These Safety Checks

Best Buy Outdoor Wireless Speakers !8!# Shop For Portable Recorders !8!# Price Skagen Ladies Watches

PC Case Mods! - Cutting Plexiglas or Acrylic for Side Window

In my last video i showed you how to cut a window out of steel, so in this video I'm going to show you how to cut the acrylic to put in the new window you cut out! Make sure you use something similar to a dremel so it does not chip the material. I used a high speed air cut off tool which spins fast enough to just melt it so nothing gets tore up. Feel free to comment further suggestions. Please subscribe to my videos

Protec Snow Helmets Cheap


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links